Products of WISE
The new 2086 (v14) = Version 14 incl. Knot function!
Professional Tension Head is designed
to convert your existing manual pull machine to a modern constant pull
stringing machine. It takes only minutes to simply remove your manual
tension head and clamp on the electronic head
Accuracy to a tenth of a pound
Continuous pull or lock out
tensioning
Tension can be set in pounds or kilos
Digital readout
Speed control - 3 speed settings
New quieter motor
Touch pad stringing or a foot control
is available as an optional extra
Pre-stretch function to varying
percentages
Memory banks and other time savers
Knot function
NEW - Knot Function. You can use the pause button for knot function
For speed,
accuracy and reliability the 2086 Professional Tension Head
is the most effective way to convert your "Lockout" stringer to a
modern "Constant Pull" stringing machine.
If you have a
popular Ektelon, Alpha, or Gamma stringer you owe it to yourself to
try the 2086 Professional Tension Head, the most accurate
machine on the market.
It is perfectly compatible with any
Eagnas, Century, Czech Sports, Winn, Toalson, Gossen, Gutermann,
Pro's Pro, Zebest and other manual stringing machines.
The 2086
Professional transforms this:
into this:
Homepage of the producer:
http://www.tennishead.com
GETTING STARTED
Slide the mechanical winder off the tension bar.
Slide the 2086
Professional onto the same bar. The gears do
not engage. Plug it
in. A brightly focused digital display, up and down
arrows and a
start bar get you going. .Set tension in tenths of a pound or kilo,
then put it in memory for today or the next time you turn your
machine on.
Instructions
Frequently Asked Questions
How long will it take to install and can I do it myself?
About five minutes. Slide the current spring tensioner off. Slide
the 2086 onto the same bar. It does not engage any gears. Tighten
the locking screw. Plug it in. Check our videohere. You can download our
instruction booklethere.
How do I pre-stretch while stringing?
Pre-stretch is built in. Set the amount you want, if any. At 50
pounds plus 15% you will see the digital read-out go to 57.5 pounds,
pause, then return to the set point.
Is there a way to increase the tension for knots?
Yes. Use the pre-stretch button (see above).
What is a Diablo?
A bobbin in front of the gripper which feeds string level with the
jaws and takes some stress off the string.
Can I calibrate the machine?
After every pull the machine resets its zero point and checks its
electronics. If you have a scientific gauge to measure tension we
can tell you how to calibrate the 2086 from the front panel. A
spring calibrator is usually not accurate enough. At any time the
machine can be sent to Wise USA for a free re-calibration checkup.
We only charge for return shipping.
€699.00*
Weight: kg 8
€699.00*
Weight: kg 8
"adapter (low hight) for the Wise 2086 Electronic Tennishead universal" With this adapter you can fix your wise Motor on drop weight stringing machines: Hight: 20,2 mm This adapter fits to Premium Stringer 3600Premium Stringer 3800Superstringer T10Superstringer T12Superstringer T15Superstringer T20Superstringer T70Superstringer T80TennisMan StringMaster Pro 46 und Pro 50TennisMan StringMaster 3700, 3800 und 4000TennisMan StringMaster Deluxe (und die Special Edition)Tyger StringEco 45
€49.90*
Weight: kg 0.5
€49.90*
Weight: kg 0.5
Calibrator
The 2090 is a sophisticated tool for measuring the accuracy of your tension head. It can be used on any stringing machine, electronic or manual. It displays in kilos or pounds and shuts itself off when it is not in use for more than 1 minute.
CALIBRATOR DIRECTIONS
Mount a racket on your machine. Cut a short length of string (even scrap will do). Pass the string through to the racket clamp furthest from the racket then loop it into one of the links in the 2090. Place the 2090 in the center of the not-strung racket. Use another small piece of string and pass it through the other link and to the open jaws of the gripper. This is done so the 2090 does not sag and present an inaccurate reading. Compare the 2090 reading to the setting on your machine. Adjust your machine if necessary. You can return the 2090 to Tennishead at any time for a free verification of its accuracy. Be sure to pack it well to prevent shipping damage.
€99.00*
Weight: kg 0.8
Wise 2086 High Height Adaptor PlateYou can use this for mounting the wise tenstionhead motor on gamma progression II 602 FC hight: 45 mm
€44.90*
Weight: kg 8
€44.90*
Weight: kg 8
With this adaptor you can mount the Wise tensionhead Motor on many machines. For example: Stringmaster 4000 hight: 34,5mm
€44.90*
Weight: kg 8
€44.90*
Weight: kg 8
New string gripper system with glide to activate: https://youtu.be/fGBUrRXSe6QFit only for V14 version of the wise tennsionhead. Attention: If you change the original wise string gripper system you should know that this string gripper system is higher (about 25 mm) then the original. = you should raise the turntable about 25 mm (2,5 cm). You can use washers for this or this distance tubes: distance tubes
€179.00*
Weight: kg 8
€179.00*
Weight: kg 8
This Gripper, replaces any of the models of the WISE 2086 series. gripper switch is included.-Made of high precision machined soft aluminum minimizes the damage to the string.-Unique design with roller bearings allows for a better pressure distributionMaintenance: remove from machine. Clean with acetone as needed.Lubricate periodically with 2 drops of 3 in 1 sewing oil on each side of the roller jaws.Keep oil from dripping inside the machine. Replace ifjaws are worn out or show signs of uneven wear..
€119.00*
Weight: kg 8
Wise 2086 Adaptor Plate Spacer is compatible with all Low and Medium HeightAdaptor Plates and raises the height of the Wise 2086 by 3mm. Inaddition, multiple spacers can be used for finite adjustments. is compatible with all Low and Medium HeightAdaptor Plates and raises the height of the Wise 2086 by 3mm. Inaddition, multiple spacers can be used for finite adjustments.
€14.90*
Weight: kg 0.5
This Gripper, replaces any of the models of the WISE 2086 series. gripper switch is included.-Made of high precision machined soft aluminum minimizes the damage to the string.-Unique design with roller bearings allows for a better pressure distributionMaintenance: remove from machine. Clean with acetone as needed.Lubricate periodically with 2 drops of 3 in 1 sewing oil on each side of the roller jaws.Keep oil from dripping inside the machine. Replace ifjaws are worn out or show signs of uneven wear..
€99.00*
Weight: kg 8
Wise 2086 Gamma Adaptor Plate => to connect the wise motor to crank machines(Attention, fit not for all machines. Gamma for example needs different adaptors)
€39.90*
Weight: kg 8
Wise 2086 Gamma Adaptor Plate => to connect the wise motor to Gamma crank machines
€49.90*
Weight: kg 8
Trigger switch for wise tennishead motor. Fit for all wise tensionhead. You can change it very easy with the old trigger.
€39.90*
Weight: kg 8
used Motor. only 20 rackets strung, looks like a new motor
The new 2086 (v14) = Version 14 (on the market
since 2018)
Professional Tension Head is designed
to convert your existing manual pull machine to a modern constant pull
stringing machine. It takes only minutes to simply remove your manual
tension head and clamp on the electronic head
Accuracy to a tenth of a pound
Continuous pull or lock out
tensioning
Tension can be set in pounds or kilos
Digital readout
Speed control - 3 speed settings
New quieter motor
Touch pad stringing or a foot control
is available as an optional extra
Pre-stretch function to varying
percentages
Memory banks and other time savers
NEW - Optional diablo available, ideal for multifilament
and natural gut strings to reduce crushing the string in the clamp. The
height is adjustable for use with different machines
For speed,
accuracy and reliability the 2086 Professional Tension Head
is the most effective way to convert your "Lockout" stringer to a
modern "Constant Pull" stringing machine.
If you have a
popular Ektelon, Alpha, or Gamma stringer you owe it to yourself to
try the 2086 Professional Tension Head, the most accurate
machine on the market.
It is perfectly compatible with any
Eagnas, Century, Czech Sports, Winn, Toalson, Gossen, Gutermann,
Pro's Pro, Zebest and other manual stringing machines.
The 2086
Professional transforms this:
into this:
Homepage of the producer:
http://www.tennishead.com
GETTING STARTED
Slide the mechanical winder off the tension bar.
Slide the 2086
Professional onto the same bar. The gears do
not engage. Plug it
in. A brightly focused digital display, up and down
arrows and a
start bar get you going. .Set tension in tenths of a pound or kilo,
then put it in memory for today or the next time you turn your
machine on.
Instructions
Frequently Asked Questions
How long will it take to install and can I do it myself?
About five minutes. Slide the current spring tensioner off. Slide
the 2086 onto the same bar. It does not engage any gears. Tighten
the locking screw. Plug it in. Check our videohere. You can download our
instruction booklethere.
How do I pre-stretch while stringing?
Pre-stretch is built in. Set the amount you want, if any. At 50
pounds plus 15% you will see the digital read-out go to 57.5 pounds,
pause, then return to the set point.
Is there a way to increase the tension for knots?
Yes. Use the pre-stretch button (see above).
What is a Diablo?
A bobbin in front of the gripper which feeds string level with the
jaws and takes some stress off the string.
Can I calibrate the machine?
After every pull the machine resets its zero point and checks its
electronics. If you have a scientific gauge to measure tension we
can tell you how to calibrate the 2086 from the front panel. A
spring calibrator is usually not accurate enough. At any time the
machine can be sent to Wise USA for a free re-calibration checkup.
We only charge for return shipping.
€629.00*
Weight: kg 8
€629.00*
Weight: kg 8
With this adapter you can mount your Wise tensionhead to the Superstringer S90 Badminton stringing machine. (it is only a symbolphoto, the original has more holes)
€49.90*
Weight: kg 0.5
€49.90*
Weight: kg 0.5
New string gripper system with glide to activate: https://youtu.be/fGBUrRXSe6Q For wise tensionhead version 12 incl. distance tubes (2,5 cm) for raising the turntable of the machine
€179.00*
Weight: kg 8
€179.00*
Weight: kg 8
Wise 2086 High Height Adaptor PlateYou can use this for mounting the wise tenstionhead motor on gamma progression II 602 FC hight: 45 mm
€39.90*
Weight: kg 8
€39.90*
Weight: kg 8
ideal for multifilament and natural gut strings to reduce crushing the string in the clamp. The height is adjustable for use with different machinesWhat is a Diablo? A bobbin in front of the gripper which feeds string level with the jaws and takes some stress off the string.
€39.90*
Weight: kg 8
