Wise 2086 Electronic Tension Head - Tennishead V14 incl. Diablo
The new 2086 (v14) = Version 14 incl. Knot function!
Professional Tension Head is designed
to convert your existing manual pull machine to a modern constant pull
stringing machine. It takes only minutes to simply remove your manual
tension head and clamp on the electronic head
Accuracy to a tenth of a pound
Continuous pull or lock out
tensioning
Tension can be set in pounds or kilos
Digital readout
Speed control - 3 speed settings
New quieter motor
Touch pad stringing or a foot control
is available as an optional extra
Pre-stretch function to varying
percentages
Memory banks and other time savers
Knot function
NEW - Knot Function. You can use the pause button for knot function
For speed,
accuracy and reliability the 2086 Professional Tension Head
is the most effective way to convert your "Lockout" stringer to a
modern "Constant Pull" stringing machine.
If you have a
popular Ektelon, Alpha, or Gamma stringer you owe it to yourself to
try the 2086 Professional Tension Head, the most accurate
machine on the market.
It is perfectly compatible with any
Eagnas, Century, Czech Sports, Winn, Toalson, Gossen, Gutermann,
Pro's Pro, Zebest and other manual stringing machines.
The 2086
Professional transforms this:
into this:
Homepage of the producer:
http://www.tennishead.com
GETTING STARTED
Slide the mechanical winder off the tension bar.
Slide the 2086
Professional onto the same bar. The gears do
not engage. Plug it
in. A brightly focused digital display, up and down
arrows and a
start bar get you going. .Set tension in tenths of a pound or kilo,
then put it in memory for today or the next time you turn your
machine on.
Instructions
Frequently Asked Questions
How long will it take to install and can I do it myself?
About five minutes. Slide the current spring tensioner off. Slide
the 2086 onto the same bar. It does not engage any gears. Tighten
the locking screw. Plug it in. Check our videohere. You can download our
instruction booklethere.
How do I pre-stretch while stringing?
Pre-stretch is built in. Set the amount you want, if any. At 50
pounds plus 15% you will see the digital read-out go to 57.5 pounds,
pause, then return to the set point.
Is there a way to increase the tension for knots?
Yes. Use the pre-stretch button (see above).
What is a Diablo?
A bobbin in front of the gripper which feeds string level with the
jaws and takes some stress off the string.
Can I calibrate the machine?
After every pull the machine resets its zero point and checks its
electronics. If you have a scientific gauge to measure tension we
can tell you how to calibrate the 2086 from the front panel. A
spring calibrator is usually not accurate enough. At any time the
machine can be sent to Wise USA for a free re-calibration checkup.
We only charge for return shipping.
