Engines - Tensionheads
1
2
  • Del. from compare Compare product

    Tennisman Electronic Tension Ennoxx
    Finally a small engine with the same quality of the engines of machines that cost over 3500 euros.   Until now, buyers of retrofit stringing motors have always had to compromise on quality. In other words, there was a clear difference to the expensive high-tech machines on the market.   This new, accurate, high-quality, processor-controlled stringing motor puts an end to that. You can now upgrade your lever or crank machine with this professional motor and enjoy a motor of the highest quality.   The engine has a chain hoist system. Usually only the very expensive machines have 4000,- Euro upwards. = When buying the engine, make sure that the motor has a chain hoist system.   Incl. knot function!   Incl. glide to activate = when you move the jaws of the quick release, ...
    Reduced from RRP 999,00 €
    899,00 € * Weight: 8 kg
    Tennisman Electronic Tension Ennoxx
    Not on stock
    Reduced from RRP 999,00 €
    899,00 € * Weight: 8 kg
  • Del. from compare Compare product

    Tennisman Electronic Tension Motor A01
    Motor for stringing machines. Pulling system with a chain (most of the expensive machines have a motor with a chain pulling system) Continuous pull Tension can be set in pounds or kilos Digital readout Speed control - 3 speed settings New quieter motor Touch pad  Pre-stretch function to varying percentages Memory banks Knot function Glide to activate You find the video under the media button  or on youtube  
    Reduced from RRP 999,00 €
    899,00 € * Weight: 8 kg
    Tennisman Electronic Tension Motor A01
    Item #: TM-A01-tensionhead
    Tennisman Electronic Tension Motor A01
    Some items on stock
    Reduced from RRP 999,00 €
    899,00 € * Weight: 8 kg
  • Del. from compare Compare product
    WISE
    Wise 2086 Electronic Tension Head - Tennishead V14 incl. Diablo
    The new 2086  (v14) = Version 14 (on the market since 2018) Professional Tension Head is designed to convert your existing manual pull machine to a modern constant pull stringing machine. It takes only minutes to simply remove your manual tension head and clamp on the electronic head Accuracy to a tenth of a pound Continuous pull or lock out tensioning Tension can be set in pounds or kilos Digital readout Speed control - 3 speed settings New quieter motor Touch pad stringing or a foot control is available as an optional extra Pre-stretch function to varying percentages Memory banks and other time savers NEW - Optional diablo available, ideal for multifilament and natural gut strings to reduce crushing the string in the clamp.  The height is adjustable for use with different machines ...
    Reduced from RRP 730,00 €
    699,00 € * Weight: 8 kg
    Wise 2086 Electronic Tension Head - Tennishead V14 incl. Diablo
    On stock
    Reduced from RRP 730,00 €
    699,00 € * Weight: 8 kg
  • Del. from compare Compare product
    WISE
    Stringgrippersystem for Wise 2086 Electronic Tennishead V14
    New string gripper system with glide to activate: https://youtu.be/fGBUrRXSe6Q Fit only for V14 version of the wise tennsionhead.    Attention: If you change the original wise string gripper system you should know that this string gripper system is higher (about 25 mm) then the original.   = you should raise the turntable about 25 mm (2,5 cm).   You can use washers for this or this distance tubes:   distance tubes
    179,00 € * Weight: 8 kg
    Stringgrippersystem for Wise 2086 Electronic Tennishead V14
    On stock
    179,00 € * Weight: 8 kg
  • Del. from compare Compare product
    WISE
    Stringgrippersystem for Wise 2086 Electronic Tennishead V12
    New string gripper system with glide to activate: https://youtu.be/fGBUrRXSe6Q   For wise tensionhead version 12   incl. distance tubes (2,5 cm) for raising the turntable of the machine
    179,00 € * Weight: 8 kg
    Stringgrippersystem for Wise 2086 Electronic Tennishead V12
    Some items on stock
    179,00 € * Weight: 8 kg
  • Del. from compare Compare product
    WISE
    Wise 2086 Replacement Gripper
     This Gripper, replaces any of the models of the WISE 2086 series. gripper switch is included. -Made of high precision machined soft aluminum minimizes the damage to the string. -Unique design with roller bearings allows for a better pressure distribution Maintenance: remove from machine. Clean with acetone as needed. Lubricate periodically with 2 drops of 3 in 1 sewing oil on each side of the roller jaws.Keep oil from dripping inside the machine. Replace if jaws are worn out or  show signs of  uneven wear..      
    119,00 € Weight: 8 kg
    Wise 2086 Replacement Gripper
    WISEItem #: A0984+d-2017
    Wise 2086 Replacement Gripper
    Not on stock
    119,00 € Weight: 8 kg
  • Del. from compare Compare product
    WISE
    Trigger switch for Wise 2086 tensionhead
    Trigger switch for wise tennishead motor.  Fit for all wise tensionhead.  You can change it very easy with the old trigger.      
    39,90 € Weight: 8 kg
    Trigger switch for Wise 2086 tensionhead
    Some items on stock
    39,90 € Weight: 8 kg
  • Del. from compare Compare product
    WISE
    Switch for Wise 2086 tensionhead
           
    29,90 € * Weight: 8 kg
    Switch for Wise 2086 tensionhead
    Not on stock
    29,90 € * Weight: 8 kg
  • Del. from compare Compare product
    WISE
    Diablo
      ideal for multifilament and natural gut strings to reduce crushing the string in the clamp.  The height is adjustable for use with different machinesWhat is a Diablo?    A bobbin in front of the gripper which feeds string level with the jaws and takes some stress off the string.      
    39,90 € * Weight: 8 kg
    Diablo
    WISEItem #: A099
    Diablo
    Not on stock
    39,90 € * Weight: 8 kg
  • Del. from compare Compare product
    WISE
    Wise 2086 Transformer 15V Power Supply
      
    49,90 € * Weight: 8 kg
    Wise 2086 Transformer 15V Power Supply
    Not on stock
    49,90 € * Weight: 8 kg
  • Del. from compare Compare product
    WISE
    Wise Calibrator Tennishead 2090
    Calibrator The 2090 is a sophisticated tool for measuring the accuracy of your tension head. It can be used on any stringing machine, electronic or manual. It displays in kilos or pounds and shuts itself off when it is not in use for more than 1 minute.     CALIBRATOR DIRECTIONS Mount a racket on your machine. Cut a short length of string (even scrap will do). Pass the string through to the racket clamp furthest from the racket then loop it into one of the links in the 2090. Place the 2090 in the center of the not-strung racket. Use another small piece of string and pass it through the other link and to the open jaws of the gripper. This is done so the 2090 does not sag and present an inaccurate reading. Compare the 2090 reading to the setting on your machine. Adjust your machine if necessary. You can return the ...
    79,00 € * Weight: 0.8 kg
    Wise Calibrator Tennishead 2090
    Some items on stock
    79,00 € * Weight: 0.8 kg
  • Del. from compare Compare product
    WISE
    Wise 2086 Adaptor Plate Spacer
    Wise 2086 Adaptor Plate Spacer is compatible with all Low and Medium Height Adaptor Plates and raises the height of the Wise 2086 by 3mm. In addition, multiple spacers can be used for finite adjustments. is compatible with all Low and Medium Height Adaptor Plates and raises the height of the Wise 2086 by 3mm. In addition, multiple spacers can be used for finite adjustments.
    14,90 € * Weight: 0.5 kg
    Wise 2086 Adaptor Plate Spacer
    Some items on stock
    14,90 € * Weight: 0.5 kg
1
2
toTop