Wintersteiger
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Wax Brush Nylon - Wachsbürste
    Harte Nylonbürste für eine perfekte Wachsstrukturierung Wax Brush Bronze / Nylon / Horsehair • Stiff bronze brush for cleaning out wax before applying hot wax and exposing the structure • Stiff nylon bristle brush for perfect wax texturing • High-quality horsehair brush to expose the base texture After scraping, use the brush to expose the structure. Remember, it is the wax in the pores that helps improve glide, not the wax on the base or in the structure. Choose a stiff brush if a hard wax was applied or a medium-hardness brush if a soft wax was used. Brush the base from tip to tail until no more wax is removed from the structure. Next, use a soft nylon brush to get deep into the structure to remove any remaining wax. Finish with a horsehair base brush to remove any static charge from the base.
    12,90 € * 1 Bürste | 12,90 €/Bürste
    Wax Brush Nylon - Wachsbürste
    WintersteigerArt. Nr.: 55-500-016
    Wax Brush Nylon - Wachsbürste
    Wenige auf Lager
    12,90 € * 1 Bürste | 12,90 €/Bürste
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Wachsbügeleisen WINTERSTEIGER
    für Ski und Snowboards das patentierte Heizplattendesign verhindert das seitliche Abfließen des Wachses. Temperatur stufenlos bis 160 Grad einstellbar   Wax Iron High quality wax iron for skis and snowboards Instructions of Use Connect the appliance to compatible voltage as indicated on the name plate (110V). As with any appliance, never leave unattended while plugged into the power supply and unplug when not in use. Do not use near flammable products. Keep out of reach of small children and pets. Do not attempt to make any repairs or modifications to the appliance. For repairs during the warranty period, return the appliance to the retailer where it was purchased. THIS APPLIANCE IS DESIGNED EXCLUSIVELY TO WAX SKIS AND SNOWBOARDS. ALL CLAIMS FOR DAMAGE RESULTING FROM OTHER USES WILL BE DENIED. Temperature Settings ...
    39,90 € * Gewicht: 2 kg
    Wachsbügeleisen WINTERSTEIGER
    WintersteigerArt. Nr.: 57-100-290
    Wachsbügeleisen WINTERSTEIGER
    Nicht auf Lager
    39,90 € * Gewicht: 2 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Skispanner Hobby
    Robuster Skispanner aus hochfestem Aluminium   Ski Vise HOBBY Sturdy, high-tensile aluminum vise for tuning all types and shapes of skis Secure the vise to a sturdy table or solid work surface. The supports should be spaced so they provide support while not allowing the ski to over flex. Using the supplied brake retainers, secure the brakes in the up position. Place the ski on the supports and center it from side to side. For additional security, clamp the smaller black clamp to your bench or work surface under the toepiece. Place the rubber triangle around the toe piece and hook to the clamp. For working on the side edge, lift and turn the ski 90 degrees, keeping the base away from you, and place into the center jaws.
    79,90 € * Gewicht: 2 kg
    Skispanner Hobby
    WintersteigerArt. Nr.: 57_401-004
    Skispanner Hobby
    Wenige auf Lager
    79,90 € * Gewicht: 2 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Silk Wax Rot -5°C und wärmer
    Temperaturspezifisches Wachs für Ski und Snowboards. 85 g Rot -5°C und wärmer WINTERSTEIGER Slik Wax Temperature specific wax for skis and snowboards Clean base with wax remover and allow base cleaner to completely evaporate (up to 30 minutes). Set wax iron to correct temperature setting so the wax will melt but not smoke. With the wax bar on the sole of the iron drip the wax down the length of the ski or snowboard, not allowing the iron to contact the base. Now use the iron to melt the wax and completely cover the base, drip on more wax if needed. Pass the iron from tip to tail at a steady speed which is slow enough to leave a trail of melted wax about 3 inches long. Don’t over heat the ski, you should not be able to feel heat on the top skin. Allow to cool completely and remove excess wax from the base ...
    8,90 € * Gewicht: 1 kg
    Silk Wax Rot -5°C und wärmer
    WintersteigerArt. Nr.: 57-440-102
    Silk Wax Rot -5°C und wärmer
    Auf Lager
    8,90 € * Gewicht: 1 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Silk Wax green -15 bis -5°C
    Temperaturspezifisches Wachs für Ski und Snowboards. 85 g Grün -15 bis -5°C WINTERSTEIGER Slik Wax Temperature specific wax for skis and snowboards Clean base with wax remover and allow base cleaner to completely evaporate (up to 30 minutes). Set wax iron to correct temperature setting so the wax will melt but not smoke. With the wax bar on the sole of the iron drip the wax down the length of the ski or snowboard, not allowing the iron to contact the base. Now use the iron to melt the wax and completely cover the base, drip on more wax if needed. Pass the iron from tip to tail at a steady speed which is slow enough to leave a trail of melted wax about 3 inches long. Don’t over heat the ski, you should not be able to feel heat on the top skin. Allow to cool completely and remove excess wax from the base ...
    8,90 € * Gewicht: 1 kg
    Silk Wax green -15 bis -5°C
    WintersteigerArt. Nr.: 57-440-100
    Silk Wax green -15 bis -5°C
    Auf Lager
    8,90 € * Gewicht: 1 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Silk Wax Gelb +4°C und wärmer
    Temperaturspezifisches Wachs für Ski und Snowboards. 85 g Gelb +4°C und wärmer WINTERSTEIGER Slik Wax Temperature specific wax for skis and snowboards Clean base with wax remover and allow base cleaner to completely evaporate (up to 30 minutes). Set wax iron to correct temperature setting so the wax will melt but not smoke. With the wax bar on the sole of the iron drip the wax down the length of the ski or snowboard, not allowing the iron to contact the base. Now use the iron to melt the wax and completely cover the base, drip on more wax if needed. Pass the iron from tip to tail at a steady speed which is slow enough to leave a trail of melted wax about 3 inches long. Don’t over heat the ski, you should not be able to feel heat on the top skin. Allow to cool completely and remove excess wax from the base ...
    8,90 € * Gewicht: 1 kg
    Silk Wax Gelb +4°C und wärmer
    WintersteigerArt. Nr.: 57-440-103
    Silk Wax Gelb +4°C und wärmer
    Auf Lager
    8,90 € * Gewicht: 1 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Silk Wax Blau -12 bis -8°C
    Silk Wax Blau Temperaturspezifisches Wachs für Ski und Snowboards. 85 g Rot -5°C und wärmer WINTERSTEIGER Slik Wax Temperature specific wax for skis and snowboards Clean base with wax remover and allow base cleaner to completely evaporate (up to 30 minutes). Set wax iron to correct temperature setting so the wax will melt but not smoke. With the wax bar on the sole of the iron drip the wax down the length of the ski or snowboard, not allowing the iron to contact the base. Now use the iron to melt the wax and completely cover the base, drip on more wax if needed. Pass the iron from tip to tail at a steady speed which is slow enough to leave a trail of melted wax about 3 inches long. Don’t over heat the ski, you should not be able to feel heat on the top skin. Allow to cool completely and remove excess wax from the base ...
    8,90 € * Gewicht: 1 kg
    Silk Wax Blau -12 bis -8°C
    WintersteigerArt. Nr.: 57-440-101
    Silk Wax Blau -12 bis -8°C
    Auf Lager
    8,90 € * Gewicht: 1 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Quick Sharp Extra File Guide - Für die Seitenkante
    Seitenkantenfeilenhalter mit den Einsätzen Zirconium-, Finn- und Diamant-Feile für 89 - 88 Grad   QUICK SHARP EXTRA File Guide Edge sharpener including Trizact, File and Diamond Tools The QUICK SHARP is available with 3 different tools for easy maintenance of your side edges. The TRIZACT tool is used to clean rusty edges while removing rock burrs. The FILE sharpens and bevels the edges while removing damaged areas. The DIAMOND is used for finishing the edge, removing the small burr formed during filing, and leaving the edge smooth and sharp. Make sure your tools are clean before you start, and replace any that have become worn and dull. The TRIZACT and DIAMOND tools are multidirectional and can be placed in the holder any way. The FILE is directional and can only be used in the direction of the arrow. Choose the ...
    28,90 € * Gewicht: 1 kg
    Quick Sharp Extra File Guide - Für die Seitenkante
    Wenige auf Lager
    28,90 € * Gewicht: 1 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Plexi Scraper 5 mm - Abziehklinge für Snowboard
    Abziehklinge zum Entfernen von abgekühltem Wachs vom Belag 320 x 70 x 5 mm   Plexi Scraper 3mm / 5mm To remove cooled wax from the base After the wax has cooled to room temperature, any excess must be scraped off and the structure must be brushed. Always allow the wax and the ski or snowboard to cool to room temperature before scraping, otherwise the warm wax will be pulled from the pores, leaving the base dry. Start by using a plastic scraper with a 90° edge at a slight angle. Beginning with the tip of the ski or snowboard and using long overlapping strokes, start removing excess wax from the base. Repeat until all of the wax is removed from the base. Make sure any wax that may have dripped down the sidewalls is removed as well. After the wax is scraped from the base it should then be brushed for optimal ...
    10,90 € * Gewicht: 1 kg
    Plexi Scraper 5 mm - Abziehklinge für Snowboard
    WintersteigerArt. Nr.: 55-200-015
    Plexi Scraper 5 mm - Abziehklinge für Snowboard
    Wenige auf Lager
    10,90 € * Gewicht: 1 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Plexi Scraper 3 mm - Abziehklinge
    Abziehklinge zum Entfernen von abgekühltem Wachs vom Belag 130 x 60 x 3 mm   Plexi Scraper 3mm / 5mm To remove cooled wax from the base After the wax has cooled to room temperature, any excess must be scraped off and the structure must be brushed. Always allow the wax and the ski or snowboard to cool to room temperature before scraping, otherwise the warm wax will be pulled from the pores, leaving the base dry. Start by using a plastic scraper with a 90° edge at a slight angle. Beginning with the tip of the ski or snowboard and using long overlapping strokes, start removing excess wax from the base. Repeat until all of the wax is removed from the base. Make sure any wax that may have dripped down the sidewalls is removed as well. After the wax is scraped from the base it should then be brushed for optimal ...
    3,90 € * Gewicht: 1 kg
    Plexi Scraper 3 mm - Abziehklinge
    WintersteigerArt. Nr.: 55-200-013
    Plexi Scraper 3 mm - Abziehklinge
    Wenige auf Lager
    3,90 € * Gewicht: 1 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Metal Scraper
    Metall-Abziehklinge zum Entfernen von überschüssigem Polymaterial vom Belag 130 x 60 mm   Metal Scraper To remove excess repair material from the base After the repair material has cooled completely, use the metal scraper to remove the excess material and blend the repair into the base. Place the scraper on the base and grasp firmly, placing your forefingers on the leading face of the scraper and your thumbs near the rear bottom corners. Tilt the scraper slightly forward and push it down the ski or board removing the repair material in thin, even sheets until the base looks smooth.
    5,90 € * Gewicht: 0.5 kg
    Metal Scraper
    WintersteigerArt. Nr.: 55-240-457
    Metal Scraper
    Wenige auf Lager
    5,90 € * Gewicht: 0.5 kg
  • Wintersteiger
    Aus Vergl. entfernen Artikel vergleichen
    Wintersteiger
    Gummi Stone
    Schleifgummi zum Brechen und Entgraten von Kanten 40x20x65 mm Soft Red Gummi Stone For fine buffing and polishing on the edge Used for finer buffing and polishing on a ski and snowboard edge. Dimensions: 2 1/2“ x 1 1/2“ x 3/4“ (6,5 x 3,8 x 1,9 cm) Starting at the tip of the ski/board, the gummi stone should be run at a 45 degree angle for up to 4” to 8” (10 to 20 cm) past the contact point. Making multiple passes, reducing the length of the stroke each time, feather the edge from the tip to the set bevels. Run the gummi stone from tip to tail to deburr and repeat the detune process in the tail. The further down the ski/board the detune is applied the more forgiving the ski/board becomes. This allows for smoother initiation and easier release of the turn. The shorter the detune the more aggressive ...
    7,90 € * Gewicht: 0.5 kg
    Gummi Stone
    WintersteigerArt. Nr.: 57-420-242
    Gummi Stone
    Wenige auf Lager
    7,90 € * Gewicht: 0.5 kg
toTop